Tips for Fixing and Preventing Clogged Drains

Every once in a while, all homeowners experience a clogged or slow-moving drain or pipe. And while these situations are annoying, fixing a plugged-up sink or a totally clogged drain is not usually a difficult process. And the majority of common situations will not require you to call a plumber in to help out.
The typical stopped up drain doesn’t happen overnight. Most often, gunk sitting inside a drain pipe will slowly build up, causing the pipe to drain slower and slower. At some point, usually over several months, the clog may achieve a mass that is finally capable of completely shutting down the flow of water down the pipe. That being said, plumbers in the United States have noticed that the day after Thanksgiving is the busiest day of the year for phone calls concerning clogged kitchen sinks.
Most clogs show up in the drain plumbing of often-used toilets, showers, laundry sinks, tubs, bathroom and kitchen sinks. The primary culprits of plugs in the kitchen Slow Draining Sink Baking Soda Vinegar area sinks are greases, oils and food. The key cause in bathroom plumbing problems is hair and soap scum that can join together to produce an effective plug.
With the exception of a block in a toilet, you can use a plumber’s zip-it tool to yank up the standard hair, soap and grease clump that is blocking the free circulation of waste water. These handy tools are about 18 inches long and look very much like High Water Pressure Causes a bendable plastic ruler, except that they have teeth along their edges, which enables the tool to move into a clog and then snag and yank the block back up out of the pipe. These tools cost just a couple of dollars at almost any hardware store.
You can also use a typical household plunger in most sinks, toilets and bathtubs. Occasionally the shape of a bathroom sink makes it a bit more difficult to use a plunger effectively. The only trick to effectively using a plunger is to make sure you have a tight seal between the plunger and the fixture. By pulling up and then pushing back down, the plunger will drive down and then suck back up the contents of the pipe. These movements are usually enough to move the blockage enough so that it passes beyond the point in the pipe where it is stuck.
There is one more tool that homeowners can use. It’s called a plumber’s snake. A plumber’s snake is a strong but bendable cable that snakes down into the drain and twists through the pipes, hopefully driving the obstruction deeper into a larger section of pipe and washing the clog free. Working plumbers will have expensive electric-powered snakes, but you will just need the economy model which operates with a hand crank, similar to a fishing reel.
You will not to use any chemicals to clear your drain pipes. The chemical products you can see advertised at your local hardware store will be too harsh on both your pipes and either your septic system or your city’s sewer system. The advertising on the packages will entice you with their ease of use, but they are toxic and their fumes can be harmful. Plus, they just don’t seem to work.
To keep your pipes operating properly, you just need to prevent hair and other elements from getting into them. A metal screen or a strainer in the bottom part of each sink, shower and bathtub will help prevent potential obstructions from entering your pipes. Some plumbers suggest pouring very hot, even boiling water into your drains once a month or so.

READ  Consider A Career As A Plumber