How To Get Rid of Sink Clogs

In some point in your life you will experience some kind of plumbing problem in your house. This is one of the biggest problems a person can face. Your first thought is to call a professional plumber to come and fix your sink clog How To Fix A Toilet That Won’t Flush but hold off on calling that professional plumber. Most sink clogs are minor problems that you can repair yourself and in doing this you will not have to pay that professional plumber a big amount of cash out of your pocket.
Watch For Signs of a Plumbing Problem About To Start
Prevention is one way to fix a big sink clog problem. It is essential that you keep an eye out for sluggish or slow drains. It is harder to fix a drain that has completely clogged up than it is to fix a drain that is slow. Pouring hot water down the pipe can fix a slow drain. This also helps in loosening any grease that has built up in the pipe. You should also clean the drain screen and stopper. Doing these steps should fix your drain that is slowly draining.
If these steps do not work then try to find the problem by checking out other household drains. Doing this helps to know whether the clog is present in only Heating Contract one fixture or if other drains are clogged as well. If your other drains are clogged as well then you could have a main problem with your main drain pipe.
Getting Rid of the Sink Clog
To get rid of a sink clog you will need to get a bathroom plunger. Make sure the plunger has a large enough suction cup that will completely cover the drain when picking a plunger. The plunger should create an airtight seal around the surrounding sink. Next, fill the fixture to completely cover the plunger’s suction cup by either using eater or coating the cup’s rim with petroleum jelly. Create a vacuum by trying to seal off other outlets, like overflow drain in sinks. The push out any trapped air underneath the cup. Next, do 15 to 20 forceful up and down pumping blows to make the clog come loose. It could take you three to five time of doing this to do unclog your drain.
If the plunger technique does not work then you will need to resort to using a Snake It Out as another technique to unclog your drain. You can get a snake at your local hardware store. Snake’s can work their way through your drain pipes and physically push out the clogs. Plumbing snakes are considered to be one of the most dependable tools for fixing drainage problems. With the snake you only need to push the snake in until you hit the clog. Once the clog is hit you will hook it up by twisting your snake’s handle. After hooking the snake up, push your snake back and forth until you feel that the clog that is blocking your drain has broken up. Then flush out the pipe with cold water.
Cleanup of Your Main Drain Line
If you suspect that more than one of your draining fixtures is clogged up, then your main drain line could be the problem. This means you have to clean it up. Start by locating the clean-out plugs of the large drain pipes which you can find in your crawlspace or basement. Main drain lines can be found in your garage or somewhere else outside that is along the foundations of your house. Each plug has a cap on it that has a square fitting on the top. Use a wrench to remove the cap. Make sure you have a bucket with you to catch some dripping water. Make sure that nobody will use the facilities while the main drain line is open or some serious problems can happen.
Once everything is in place, use a plumbing snake to break up any obstructions in the main line by running the snake in all direction of the pipe. This should fix the problem with your drain being clogged in the main line and have saved you money as well.

READ  Nothing Happens When You Pull the Plug